Pool Table Refelting Is Best Left To The Professionals

By Leticia Jensen


Pool tables can develop worn spots and rips in the surface if not treated carefully. This will throw a game off for most people and charges of fixing the game in favor of you can be brought by even the friendliest competitors. The nature of the covering, which is felt, will have a lot to do with how the table is used, so a rip or worn area must be repaired or replaced. This pool table refelting is best done by a company who does this all of the time.

A small rip can be repaired by you if you have a lot of patience. Careful measurements must be made and the felt will have to be cut exactly right. The proper amount of adhesive will need to used and the area will need to be prepared properly, first. This is a test of your attention to detail as the repair must not interfere with that next game.

One of the best courses of action should be to have the entire surface recovered. This will ensure that the table has a fresh look, ready for whatever you throw at it, although not literally of course. Getting help in this project from a professional in Denver, CO will be as easy as giving them a call or stopping by the several that are available in the Mile High City. A do it yourself project of this type will need the help of a few professionals.

The professionals that do this have the experience to see it is done right. They will be able to help you see other possibilities for your table and help you with the decorative elements in the rest of the room. One of he first questions they will ask will have to do with the color you are interested in.

The vast majority of pool tables come in a standard green felt. This is fine if you are looking for standard, however, the ability to get other colors might interest you. Some of these others will be purple, blue, red, cream and those with designs on them. Sprucing up your party room can begin with the largest game there.

When the professionals arrive at your home, you will be able to see what they are doing and ask questions. They will begin by making sure of the measurements. The rails will come off to make it easy to remove the old felt. Old adhesive and staples will be removed and any rough spots will be sanded or prepared otherwise.

The exacting cuts on the felt will be accomplished, both lengthwise and for width. There will be a little left over for the staples to hang on to. There will then be applied a very thin coating of adhesive, but not too much. The felt is laid down and stretched, in all directions, to ensure a tight fit. This will then be stapled in the same location where the rails will be reattached.

Rails are then disassembled and covered as well. With weights on the table top and rails reinstalled, a 24 hour curing time will be appropriate. A representative will come back and ensure everything is as it should be. They might even challenge you to a game to make sure.




About the Author:



No comments :

Post a Comment