Riding a bike is a great way to get exercise and in most cases can save strain on your shins and knees from running. Most people think of a traditional bike when they decide to start up this exercise, but a trend towards recumbent bicycles is surging. They are different in design from the traditional bike but allow you to sit back, relax, and enjoy the scenery when going on a ride. Because of their different design, it is important to remember a few things before your first trip.
First, mounting and dismounting are different. You need to swing your leg forward instead of backward over the frame. If you swing the leg backward, you may hit the reclining seat and probably fall over.
Be sure to adjust the seat and handlebars before you take off. It might be common sense, but with this type of cycle, it is more important in order to use it to its full potential. The bike is designed for you to be able to sit back and not have to reach for things. Adjust your bike until the fit feels good and allows you to recline.
Make sure you put the brakes on when you start and stop. This type of bike is prone to fall over if you don't have a good sense of control. The first few times you use the cycle will be the most important while you learn the best way to get on and off.
This cycle is not designed to stress you while you ride. With this in mind, be sure to start in a low gear and use the gears appropriately to be able to enjoy your ride. You can get great exercise without having to be a speed demon.
Starting takes some practice. Set your pedals to the 12 o'clock position for best starting. You do not push off with your foot but instead will use the pedal to get started.
While riding the bike, sit back and relax. This is designed with this purpose in mind. On other bikes, you lean forward and are looking at the ground just in front of you. Here, you actually need to look up and forward so you can use the bike to its full potential.
Use the pedal to get started. As stated before, you should start by pushing on the pedal. Quickly move your ground foot to the other pedal to keep going. Since you are starting in a reclining position you will not have enough leverage to push from the ground to get started like you would with a ten speed.
Stopping is more difficult at first. With other types of cycles, you put on the brakes and put one foot on the ground and lean the bike. With this one, you want to apply the brakes and plant both feet on the ground, almost standing up. Be sure to straighten the wheels or the bike may fall over.
This is one of the most enjoyable ways to go on a cycle ride. You can relax in the reclining position and once you get used to the differences you will find that you are not nearly as tired after a ride. You will usually end up going farther, on longer rides. You will also be able to enjoy the scenery since you are looking up instead of hunched over, looking at the ground.
First, mounting and dismounting are different. You need to swing your leg forward instead of backward over the frame. If you swing the leg backward, you may hit the reclining seat and probably fall over.
Be sure to adjust the seat and handlebars before you take off. It might be common sense, but with this type of cycle, it is more important in order to use it to its full potential. The bike is designed for you to be able to sit back and not have to reach for things. Adjust your bike until the fit feels good and allows you to recline.
Make sure you put the brakes on when you start and stop. This type of bike is prone to fall over if you don't have a good sense of control. The first few times you use the cycle will be the most important while you learn the best way to get on and off.
This cycle is not designed to stress you while you ride. With this in mind, be sure to start in a low gear and use the gears appropriately to be able to enjoy your ride. You can get great exercise without having to be a speed demon.
Starting takes some practice. Set your pedals to the 12 o'clock position for best starting. You do not push off with your foot but instead will use the pedal to get started.
While riding the bike, sit back and relax. This is designed with this purpose in mind. On other bikes, you lean forward and are looking at the ground just in front of you. Here, you actually need to look up and forward so you can use the bike to its full potential.
Use the pedal to get started. As stated before, you should start by pushing on the pedal. Quickly move your ground foot to the other pedal to keep going. Since you are starting in a reclining position you will not have enough leverage to push from the ground to get started like you would with a ten speed.
Stopping is more difficult at first. With other types of cycles, you put on the brakes and put one foot on the ground and lean the bike. With this one, you want to apply the brakes and plant both feet on the ground, almost standing up. Be sure to straighten the wheels or the bike may fall over.
This is one of the most enjoyable ways to go on a cycle ride. You can relax in the reclining position and once you get used to the differences you will find that you are not nearly as tired after a ride. You will usually end up going farther, on longer rides. You will also be able to enjoy the scenery since you are looking up instead of hunched over, looking at the ground.
About the Author:
You can get a detailed overview of the things to consider when buying recumbent bicycles and view our selection of bicycles at http://www.utahtrikes.com/PROD-11617617.html right now.
No comments :
Post a Comment