If you have hearing loss problems, then an audiometer is the best device to evaluate to what extend your problem is. This device can also be used to test other problems specifically those that involve the Ear, nose or the throat. This device is calibrated in decibel units which are universally accepted. The calibration is however done in regular basis to ensure that the device gives a perfect reading when in use.
The device resembles a pair of headphones but is fitted with a feedback button which is controlled by a computer. The computer helps the specialist conducting the hearing loss analysis to display the data which is eventually used to form an audiogram. This audiogram is the one used to analyze the range through which a patient can react to given sound frequency.
An audiogram is simple graph showing the intensity of the sound in decibels versus the frequency in hertz. It gives a representation of the audible threshold of a patient under test exactly as it is being measured by the audiometer. When constructing an audiogram, the specialist takes into consideration the fundamental frequencies, as they must be included the audiometer readings. Normally, a range of 100HZ to 8000Hz is considered to be the range in which an audiogram can be constructed.
There are two types of audiometers found in the market. These are the hardware and the software types. The two types are closely related though they vary in cost and efficiency. The software type is not very sophisticated. It is the one found in several homes as it is easier to use. It only requires a computer program to display its results.
The hardware type is a bit complex. It requires an experienced person to use it. It comes with an embedded control unit and a feedback button as well. It requires a special type of a computer application to display its results. This device is relatively expensive. It is found in referral hospitals and research labs.
The overall procedure of identifying a hearing loss problem is not complex as you might think. With this device, it is very easy.it only entails the patient being subjected to an audio from the device then their reaction at different frequencies being noted. These different frequencies give a range of the hearing capabilities of the patient. The range aid the medical specialist in treating such a patient.
During hearing loss analysis, the way through which patients respond to the sound varies. Adult patients are required to press a button while small children are provided with toys to show their reactions to the sound. Head turn can also be used to note a reaction to the sound.
This hearing loss test using an audiometer can also be extended to animals. Vet doctors have devised unique ways to make sure that animals do respond to various frequencies. For instance they can provide food to the animal as way of rewarding it for responding to a certain frequency. The animal will be trained to understand that its response to a given frequency usually means food and therefore the doctor will be able to record down the range through which the animal can respond to different frequencies.
The device resembles a pair of headphones but is fitted with a feedback button which is controlled by a computer. The computer helps the specialist conducting the hearing loss analysis to display the data which is eventually used to form an audiogram. This audiogram is the one used to analyze the range through which a patient can react to given sound frequency.
An audiogram is simple graph showing the intensity of the sound in decibels versus the frequency in hertz. It gives a representation of the audible threshold of a patient under test exactly as it is being measured by the audiometer. When constructing an audiogram, the specialist takes into consideration the fundamental frequencies, as they must be included the audiometer readings. Normally, a range of 100HZ to 8000Hz is considered to be the range in which an audiogram can be constructed.
There are two types of audiometers found in the market. These are the hardware and the software types. The two types are closely related though they vary in cost and efficiency. The software type is not very sophisticated. It is the one found in several homes as it is easier to use. It only requires a computer program to display its results.
The hardware type is a bit complex. It requires an experienced person to use it. It comes with an embedded control unit and a feedback button as well. It requires a special type of a computer application to display its results. This device is relatively expensive. It is found in referral hospitals and research labs.
The overall procedure of identifying a hearing loss problem is not complex as you might think. With this device, it is very easy.it only entails the patient being subjected to an audio from the device then their reaction at different frequencies being noted. These different frequencies give a range of the hearing capabilities of the patient. The range aid the medical specialist in treating such a patient.
During hearing loss analysis, the way through which patients respond to the sound varies. Adult patients are required to press a button while small children are provided with toys to show their reactions to the sound. Head turn can also be used to note a reaction to the sound.
This hearing loss test using an audiometer can also be extended to animals. Vet doctors have devised unique ways to make sure that animals do respond to various frequencies. For instance they can provide food to the animal as way of rewarding it for responding to a certain frequency. The animal will be trained to understand that its response to a given frequency usually means food and therefore the doctor will be able to record down the range through which the animal can respond to different frequencies.
No comments :
Post a Comment